Description
CLEANSE
Cleanse is a stabilized solution of Hypochlorous acid (HOCl), a mild acid derived from sodium chloride (NaCl) and a proprietary electrochemical treatment process. Typically, hypochlorous degrades quickly in solution, leaving it effective up to 2 years when stored properly.
The result is a unique, plant-safe chemical with powerful oxidative properties to keep your root zone clean and free of unwanted organisms, mineral scale and biofilm buildup. These special properties are key to improving both mineral and oxygen availability in the growing media.
• Non-toxic – Safe to use on plants in and stage of growth
• Neutral pH – Won’t affect solution stability
• Increases Oxidation-Reduction Potential (ORP) to clean water
• Breaks down mineral scale – Keeps irrigation systems in pristine condition
• Reduces biofilm – Keep lines clear of dangerous organic material
• Very low TDS – Doesn’t throw off mineral balance
• Promotes robust root growth
• Effective as a final flush to clean growing media
• Keeps irrigation system cleaner and running efficiently longer
• Reduces mineral buildup in growing media and lines
• Increases oxygen and nutrient availability in growing media
Product Features |
|
Irrigation |
Compatible with most dosing and irrigation systems. May cause biofilm accumulation in systems without proper cleaning protocols. Use Athena Cleanse to reduce buildup and system clogging. |
Solubility |
100% soluble, no residue, will not clog emitters. |
Stability |
Minimal effect on pH or EC. |
Application Instructions |
|
Irrigation system maintenance |
Regular Use: Mix 2-5 mL Athena Cleanse per gallon water for regular maintenance. Severe Conditions: Mix 10 mL Athena Cleanse per gallon water for combating severe reservoir and growing media conditions. |
Flush |
Mix 10 mL Athena Cleanse per gallon water during the final flush stage to reduce residual mineral buildup. This procedure may be used at any time if the growing media or irrigation system develops mineral imbalance or unwanted buildup. |
Foliar application and clone dip |
Mix Cleanse at a ratio of 1:10 with water (375 mL / gallon) and spray the leaf surface or fully submerge for 3 seconds. Safe to use at any stage. |
Surface cleaning |
Mix Cleanse at a ratio of 1:10 with water (375 mL / gallon) and spray all surfaces, tools and equipment. |
Irrigation lines, sprayer and pump maintenance |
Mix 10 mL Athena Cleanse per gallon water and run fully through equipment. Without draining, allow the solution to stand for at least 3 hours to fully clean. Rinse through with clean water to flush out any waste. |
Cloning and pruning |
To prevent cross-contamination and reduce fungal infections, soak scissors and scalpels in between uses in a solution of Athena Cleanse (10 mL per gallon water). |
Reviews
There are no reviews yet.