Replacement Peristaltic pump

Description

Total Grow Control Peristaltic Pump

Chemical solution and slurry metering pumps designed, engineered, and built to last. The pump case is molded of a rugged, chemical resistant ABS. Mounting pads and a built-in wall mounting bracket allow a choice of flat surface or wall mounted installation.
 
The thermal or impedance protected gear motor is safe, quiet and dependable. All metal gearing parts are heat-treated and the output shaft is supported by heavy-duty bearings.
  
The feeder head is molded of UV and acid resistant polycarbonate and is designed to snap on and off without tools.
 
A 10-minute solid-state electric current interrupter is a standard feature, built into every MEC-OMATIC Dolphin Series pump.
  
Technical Specs

• Item: Chemical Metering Pumps 
• Chemical Metering Pump Type Peristaltic 
• Max. Flow (gpd): Pumps 60.00 gpd 
• Max. Pressure: Pumps 25 psi 
• Voltage: Pumps 115VAC 
• Max. Viscosity: Pumps 300 cP 
• HP: Pumps 1/60 
• Phase: Pumps 1 
• Flow Rate Output Control Adjustable 
• Tubing Material: Peristaltic Pumps Norprene 
• Turn Down Ratio: Pumps 10:1 
• Reproducibility: Pumps +/-2.0% 
• Self-Priming: Yes 
• Suction Lift 24 ft. 
• Head and Fitting Material: Pumps Resin 
• Body Material Polycarbonate 
• Motor RPM 50 
• Height 5-5/8″ 
• Length 7-5/8″ 
• Width 6-7/8″ 
• Number of Feeds 1 
• Cord Length 6 ft. 
• Min. Flow Rate 6 gpd 
• cc/Min. 157.6 
• Max. Strokes per Minute 50 
• Hz 60 
• Standards ETL, cETL, ETL Sanitary 
• Features valve-less, non-clogging design

Features 

• Feed rates from 13 gpd (2.05 lph) to 97 gpd (15.3 lph) at 25 psi (1.72 bar).
• Pump case is molded chemical resistant ABS. 
• Thermal or impedance protected gearmotor is safe, quiet and dependable. 
• All metal gearing parts are heat-treated. 
• Output shaft is supported by heavy duty bearings. 

 
Operating Benefits 

• Quick-release, twist-off, clear polycarbonate, acid resistant head.   
• Self-lubricating chemical resistant roller assembly.  
• Durable, long-lasting tubing with no tube adjustment.  
• Heavy duty shaded pole gearmotor with lifetime lubrication.

 
Engineering Data

• Pump Head Materials: Chemical Resistant Resin 
• Pump Head Tubing: Synthetic Rubber 
• Injection Fitting (standard w/check valve): PVC 
• Strainer: FPP 
• Tubing: PE
• Pump Housing:   Chemical Resistant Resin
• Important: Material Code – PVC=Polyvinyl Chloride, PE=Polyethylene.
• Power Input: 115 VAC/60 HZ